SURFACE & CONTINUOUS FLUORESCENT LIGHTINGS

banner
Al-sharq new range of high quality surface fluorescent luminaries fitted with an Aluminium or steel white louver offers a good appearance with a quality lighting solution.

APPLICATIONS

OFFICES
SCHOOLS
BULDINGS
COMMERCIAL COMPLEX
HOSPITALS
HOTELS
SHOPS
MOSQUE
COMPUTER ROOMS


BODY

Manufactured from heavy gauge electrogalvanised steel sheet spot- welded finished in white electrostatic powder coat in both sides. Available up on request continuous type (CONT.)

LOUVRE

The LOUVRE is mirror finish from an anodized polished Aluminium or sheet steel type with V shape longitudinal and facetted Aluminium cross blades, parabolic side reflectors in order to give optimum cross blades, side reflectors in order to give optimum light distribution. Louvre is retained by wishbone springs. They are available in low brightness batwing (LB), double parabolic mirror louvre (DP), steel white louvre (SW), matt louvre (MT) and ball impact louvre (BI)

SPECIFICATION

Designed and manufactured to comply with BS4533 (EN60598)

ELECTIRCAL COMPONENT

Available in conventional (VS), high frequency (HF) and dimmable ballast is fixed on gear trays. Two ballast or four ballast version is available. Supply with switch start or electronic starters (DEOS) fitting supplied with capacitors for power factor improvement and radio interference (RFI) capacitors. Lamp holder in white polycarbonate with contacts in phosphor bronze type G13. Starter holder from white polycarbonate terminal block.

TERMINCAL BLOCK

Three pin heat resistant (L, N, E) allowed of 2.5Sqmm wires. Fitting is wired with 180C silicon rubber wire or with 105C heat resistant wire as required.

ELECTRICAL CHARACTERISTIC

Class1 electrical rated for 240V 50Hz power supply

LAMPHOLDER

G13, 2G11, G5

DEGREE OF PROTECTION

IP20

MODEL REF. Lamp\Watts DIMENSIONS
(W x L x H) (MM)
SHA3/2/18 2X18w 297X597X90
SHA3/3/18 3X18w 597X597X90
SHA3/4/18 4X18w 597X597X90
SHA3/1/36 1X36w 190X1197X90
SHA3/2/36 2X36w 297X1197 X90
SHA3/3/36 3X36w 597X1197X90
SHA3/4/36 4X36w 597X1197X90
SHA3/1/58 1X58w 190X1530X90
SHA3/2/58 2X58w 297X1530X90

ORDERING GUIDE

COMPLETE FITTING ADD THE SUFFIX CODE AFTER THE MODEL NO.
EX1: SHA3418LB
SURFACE FLUORESCENT TYPE 4X18W WITH LOW BRIGHTNESS LOUVRE
FOR STEEL WHITE LOUVRE TYPE A3 REPLACED BY A4
EX2: SHA4418SW
SURFACE FLUORESCENT TYPE 4X18W WITH STEEL WHITE LOUVRE
FOR CONTINUOUS TYPE
EX3: SHA4258SWCONT
SURFACE FLUORESCENT TYPE 2X58W WITH STEEL WHITE LOUVRE CONTINUOUS TYPE
ALL OF THE ABOVE FITTINGS ARE AVAILABLE AS EMERGENCY VERSION. TO ORDER ANY EMERGENCY FITTING, SIMPLY SUFFIX THE APPROPRIATE CATALOGUE NUMBER WITH E3
EX4: E3 SHA3418
image
SURFACE FLUORESCENT LIGHT FITTING CONTINOUS TYPE
 

Our Companies