RECESSED FLUORESCENT LIGHTING WITH STEEL WHITE LOUVRE

banner
AL-SHARQ new range of high quality Recessed fluorescent luminaries fitted with steel louver offers a good appearance with a quality lighting solution .Designed to suit for most of concealed and T-bar ceilings

APPLICATIONS

OFFICES
SCHOOLS
BULDINGS
COMMERCIAL COMPLEX
HOSPITALS
HOTELS
SHOPS
MOSQUE
COMPUTER ROOMS


BODY

Is manufactured from heavy gauge electrogalvanised steel sheet spot- welded finished in white electrostatic powder coat in both sides.

LOUVRE

The LOUVRE V shape longitudinal and facetted steel cross blades, parabolic side reflectors in order to give optimum cross blades, side reflectors in order to give optimum light distribution. Louvre is retained by wishbone springs. This type called steel white louver type (SW)

SPECIFICATION

Designed and manufactured to comply with BS4533 (EN60598)

ELECTIRCAL COMPONENT

Available in conventional (VS), high frequency (HF) and dimmable ballast is fixed on gear trays. Two ballast or four ballast version is available. Supply with switch start or electronic starters (DEOS) fitting supplied with capacitors for power factor improvement and radio interference (RFI) capacitors. Lamp holder in white polycarbonate with contacts in phosphor bronze type G13. Starter holder from white polycarbonate terminal block.

TERMINCAL BLOCK

Three pin heat resistant (L, N, E) allowed of 2.5Sqmm wires. Fitting is wired with 180C silicon rubber wire or with 105C heat resistant wire as required.

ELECTRICAL CHARACTERISTIC

Class1 electrical rated for 240V 50Hz power supply

LAMPHOLDER

G13, 2G11, G5

DEGREE OF PROTECTION

IP20

MODEL REF. Lamp\Watts DIMENSIONS
(W x L x H) (MM)
SHA6/2/18 2X18W 297X597X90
SHA6/3/18 3X18W 597X597X90
SHA6/4/18 4X18W 597X597X90
SHA6/1/36 1X36W 190X1197X90
SHA6/2/36 2X36W 297X1197 X90
SHA6/3/36 3X36W 597X1197X90
SHA6/4/36 4X36W 597X1197X90
SHA6/1/58 1X58W 190X1530X90
SHA6/2/58 2X58W 297X1530X90

ORDERING GUIDE

FOR COMPLETE FITTING ADD THE SUFFIX CODE AFTER THE MODEL NO.
EX1: SHA6418SW
RECESSED FLUORESCENT TYPE 4X18W WITH STEEL WHITE LOUVRE

ALL OF THE ABOVE FITTINGS ARE AVAILABLE AS EMERGENCY VERSION. TO ORDER ANY EMERGENCY FITTING, SIMPLY SUFFIX THE APPROPRIATE CATALOGUE NUMBER WITH E3
EX2: E3 SHA6418SW
image
RECESSED FLUORESCENT LIGHT FITTING WITH STEEL WHITE LOUVRE
 

Our Companies