DIFFUSER

banner
Al-sharq new range of high quality fluorescent luminaries fitted with DIFFUSER offers a good appearance with a quality lighting solution for protection against water & dust required .Designed to suit for most of concealed and T-bar ceilings

APPLICATIONS

OFFICES
SCHOOLS
BULDINGS
COMMERCIAL COMPLEX
HOSPITALS
HOTELS
SHOPS
MOSQUE


BODY

Is manufactured from heavy gauge electrogalvanised steel sheet spot- welded finished in white electrostatic powder coat in both sides. They are available recessed & surface types

DIFFUSERS

The diffuser is of acrylic prismatic UV – stabilized PMMA material (PR) or opal acrylic polycarbonate (OP) and held in aluminum frame or in a white painted aluminium fixed to the body with invisible hook spring for easy maintenance

STANDARDS & ELECTRICAL CHARACTERISTIC

Designed and manufactured to comply with BS4533 (EN60598)
Class I electrical rated for 240V 50Hz power supply.

ELECTIRCAL COMPONENTS

Available in conventional, high frequency and dimmable ballast is fixed on gear trays. Two ballast or four ballast version is available. Supply with switch start or electronic starters (DEOS) fitting supplied with capacitors for power factor improvement and radio interference capacitors. Lamp holder in white polycarbonate with contacts in phosphor bronze type G13. Starter holder from white polycarbonate terminal block

TERMINCAL BLOCK

Three pin heat resistant (L, N, E) allowed of 2.5Sqmm wires. Fitting is wired with 180C silicon rubber wire or with 105C heat resistant wire as required.

LAMP HOLDER

G13, 2G11, G5

DEGREE OF PROTECTION

1P40, 1P54, IP65 (diffuser from glass protection)

Model Ref. lamp\watts DIMENSIONS
(W x L x H) (MM)
SHA5/2/18 2X18w 297X597X90
SHA5/3/18 3X18w 597X597X90
SHA5/4/18 4X18w 597X597X90
SHA5/1/36 1X36w 190X1197X90
SHA5/2/36 2X36w 297X1197 X90
SHA5/3/36 3X36w 597X1197X90
SHA5/4/36 4X36w 597X1197X90
SHA5/1/58 1X58w 190X1530X90
SHA5/2/58 2X58w 297X1530X90

ORDERING GUIDE

FOR COMPLETE FITTING ADD THE SUFFIX CODE AFTER THE MODEL NO.
EX1: SHA5258OP
RECESSED FLUORESCENT TYPE 2X58W C/W OPALSCENT DIFFUSER
FOR SURFACE TYPE A5 WILL BE REPLACED BY A3
EX3: SHA3258
SURFACE FLUORESCENT TYPE 2X58W
ALL OF THE ABOVE FITTINGS ARE AVAILABLE AS EMERGENCY VERSION. TO ORDER ANY EMERGENCY FITTING, SIMPLY SUFFIX THE APPROPRIATE CATALOGUE NUMBER WITH E3
EX2: E3 SHA5258
image
RECESSED FLUORESCENT LIGHT FITTINGS WITH PRISMATIC DIFFUSER
 

Our Companies