BATTEN LUMINAIRE

banner
Al-sharq new ranges of high quality BATTEN LUMINAIRES offer a good appearance with A quality lighting solution.

APPLICATIONS

SUBSTATION
HOTELS
COMMERCIAL COMPLEX
MOSQUES
ARCHITECTURE
BULDINGS
SCHOOLS
INDUSTRIAL AREAS
SHOPS
COTINOUS LIGHTING


BODY

Rigid steel body and end caps manufactured from heavy gauge electrogalvanished steel sheet spot welded finished in white electrostatic powder coat in both sides (inside and outside).

REFLECTOR

Manufactured from steel sheet finished in white powder coat (A2). Available in asymmetrical reflector (AR), specular aluminium (SPAL) and Ball impact wire guard (WG) version available upon request.

SPECIFICATION

Designed and manufactured to comply with BS4533 (EN60598)

ELECTRICAL COMPONENTS

CONTROL GEAR
Available in various versions, conventional, high frequency and dimmable ballast. Switch start, electronic starters (DEOS) fitting supply with capacitors & RFI. Lamp & starter holders in flame retardant polycarbonate.

THE TERMINAL BLOCK

Three pin (L, N, E) wired with single solid copper 1X 0.75 Sqmm. the fitting is wired 180 º C silicon rubber wires or with 105 ºC heat resistance wire as required.

ELECTRICAL CHARACTERISTIC:

Class I electrical rated 240V/50HZ power supply.

LAMP TYPE

Fluorescent tube T8: 18W, 36W & 58W
Fluorescent tube T5: 14W, 21W, 24W, 28W, 35W. 39W, 49W, 54W & 80W

LAMP HOLDER

G13 & G5

DEGREE OF PROTECTION:

IP20

MODEL REF. LAMP/WATT LENGTH (MM) FIXING CENTERS (MM)
SHA1/1/14 1X14W 549 -
SHA1/1/18 1X18W 612 -
SHA1/2/18 2X18W 612 -
SHA1/1/21 1X21W 849 600
SHA1/1/24 1X24W 849 600
SHA2/1/28 1X28W 1149 600
SHA2/1/35 1X35W 1149 600
SHA1/1/36 1X36W 1221 600
SHA1/2/36 2X36W 1221 600
SHA2/2/36 2X36W 1221 600
SHA1/1/39 1X39W 1449 600
SHA2/1/49 1X49W 1449 600
SHA2/1/54 1X54W 1449 600
SHA1/1/58 1X58W 1521 600
SHA1/2/58 2X36W 1221 600
SHA2/2/58 2X58W 1521 600

ORDERING GUIDE

FOR COMPLETE FITTING ADD THE SUFFIX CODE AFTER THE MODEL NO.
EX1: SHA1/1/36WG
BATTEN TPYE 1X36W WITH BALL IMPACT WIRE GUARD
EX2:SHA2/1/36
BATTEN TYPE 1X36W WITH SHEET STEEL REFLECTOR
ALL OF THE ABOVE FITTINGS ARE AVAILABLE AS EMERGENCY VERSION. TO ORDER ANY EMERGENCY FITTING, SIMPLY SUFFIX THE APPROPRIATE CATALOGUE NUMBER WITH E3
EX3: E3 SHA1/1/36
thumb
BATTEN LUMINAIRE
 

Our Companies